Antenna outside will take the data and the program in module will calculate the exact location informaton (longitude, latitude and altitude) and will remit to the controller. And the controller gets the time information from atomic watch of the satellite and calculate the sunrise, sunset times + offset the times indicated by manipulation and operates on/off function on time.
2. Function and characteristics
This product has below 5 kinds of modes.
① Display Mode
You can see current time, location (longitude, latitude), sunrise, sunset times of today, on/off time set.
② Write Mode
You can input time difference with world standard time, summer time, offsetting of on/off time and select the needed sunrise, sunset time and make on/off operated on time.
③ Plan Mode
You can set week plan, holiday plan and vacation plan per each time zone.
④ Test & Override
You can set the functions of test on every other light on/off, every light on/off, of changing the on/off in case of every other light on/off and of the change of woking light per day.
⑤ Control Mode
When power is on or 5 minutes passes without key in at above 4 modes or escaped from above modes, it will be changed to the control mode and the conrol will be executed.
Adjustment of power off, adjustment of leap year and etc. are all done automatically, regardless of time since installation.
3. Electric characteristics and operation circumstances
Electric power comsumption: 4~5W
Rated input : AC90~240V / 50~60Hz
Rated output: AC220V / 7A
Maximum output load: AC90~240V / 450W
Size: 180mm(Length) * 130mm(Width)*70mm(Thickness)
Operating temperature: -30C ~ +75C
Frequency of GPS receiver module: 1575.42MHz
Use: Outside of Land buildings
Antenna ; Micro Strip
Frequency : 1,575.42±4MHZ
Impedance : 50 ohm
For all the street lights and street light plan area in any place on the earth.
Designed by sketchbooks.co.kr / sketchbook5 board skin